How would you feel if you can buy and use blackberry 3gig for just N1000 and use it in any android phone, know you will feel happy about it but i have a good news for you, you can actually change your Android phone IMEI to blackberry to Blackberry IMEI so that you can be able to subscribe and and use blackberry 3gig to any Android phone.
Below is steps on how to get it done;
Step 1:Back up your existing IMEI number using mobileuncle MTK Toolsor simply copy out your IMIE use *#06#.
Step2: Generate your own blackberry IMIE number and a pin
Step3: Root Your Android phone
Step4:Change your android phone's IMEI number with the blackberry IMEI you generated on your phone.
1. Install Mobileuncle MTK tool or dial *#*#3646633#*#* to enter Engineering Mode.
2. Open the mobileuncle tool and scroll to Engineering and select Engineer mode (MTK).
3. Locate and Click on CDS information
4. Click the Radio information and you will getphone 1andphone 2. Depending on the sim IMEI you wish to change, phone 1 is sim 1 while phone 2 is sim 2
5. To change sim 1 imei number to blackberry, touch phone 1 and in the popup, touch the AT+
6. In the key board you type any single letter and cancel only the letter you have type.
Immediately you can notice the scribes that is required for you It looks like AT+EGMR=1,7""
7. Click the first row and type the blackberry IMEI number your generated into the Parenthesis (“ ”) ensure its accuracy
8. Click the SEND AT COMMAND
9. When the pop up display indicates “AT command sent”.
10. Reboot your phone and enjoy!
I PREFARE USING MOBILEUNCLE ITS FAST AND AVAILABLE ON THE GOIF YOU WISH TO REVERT TO YOUR ORIGINAL IMEI, JUST REPEAT THE PROCEDURE USING YOUR REAL IMEIOR IF YOU DID BACKUP USING MOBILE UNCLE THEN USE IT TO RESTORE IT.
ONCE YOU HAVE SUCCESSFULLY FOLLOWED THE ABOVE PROCEDURES THEN
SEND comonth to 777
DIAL *777*21# COST (1,000 NGN)
WAIT FOR CONFIRMATION
After Confirmation, Go to your Settings>Mobile Networks>Access Points>Create or Modify (Edith) one using these settings below.
***Leave other Fields vacant save then use as default!