Open and unlock TV3 GHANA TV Channel and watch Live Matches

E-Collins

  • Administrator
  • Hero Member
  • *****
  • Posts: 10832
Open and unlock TV3 GHANA TV Channel and watch Live Matches
Posted on: April 20, 2015, 11:56:38 PM
TV3 Ghana Television channel is one of the best tv station that we use to watch live football matches for free especially UEFA Champions league and it was possible through the help of BISS CODES that enables you to unscramble some scrambled tv channels on Strong Satellite Decoders such as SRT4669XII, SRT4669X, SRT4950H, SRT4920 but the biggest problem started when MYTV AFRICA Decided to automatically Update (OTA) every strong satellite tv decoders to disable the inserting of BISS codes in strong Decoders.



The good news is that they can't stop us because we use our own money to buy their satellite machines and for that reason we decided how we make use of it in our own way.

Software to watch TV3 Ghana again on Multitv:

Since Mytv africa don't want us to use BISS key on strong decoders i found another way to say no to them and that is why i decided to help you use the biss codes on your mytv strong decodes such as SRT4669XII, SRT4669X, SRT4950H, SRT4920

NOTE: Before we proceed i will like to remind you that updating your Strong Satellite TV decoders is very risky and can destroy your strong satellite TV receiver but don't panic, i will guide you through.

Updating your Strong TV Receiver in a safer way:
To make sure you don't kill you strong satellite tv receiver (MYTV) you must make sure:

1. You must verify that your Strong Mytv Receiver is original by going to strong main website

Enter your Receiver's Serial Number and Code Number to verifiy it is a Genuine STRONG product

NOTE: At this stage, only models SRT 4669X, SRT 4669XII, SRT 4669Z, SRT 4902, SRT 4922, SRT 4930, SRT 4675, SRT 4940,SRT 4920, SRT 4920A, SRT 4922A, SRT 4663XV, SRT 4620XIII, SRT 4622XIII, SRT 4620XV, SRT 4300, SRT 4310, SRT 4329, SRT 4330, SRT 4910, SRT 4675A, SRT 4930L and SRT 4622XV may be submitted for authenticity verification.
The service will be extended to additional STRONG models over the coming months


2. You must make sure that your power source is trust, you can use your generator instead of NEPA because they are not trusted and the reason is that if in any way the receiver shutdown during update, it may not work again.

3. Make sure you use clean flash memory card or make sure you format and scan it before using it.

Once you have all of the above in place then its time to DOWNLOAD PATCHED SOFTWARE TO DECRYPT TV3 ON STRONG 469Xii, 4669x, 4920, 4922, 4922A and 4950H DECODERS

DOWNLOAD THE SOFTWARE THAT MATCHES YOUR STRONG RECEIVER.

SRT4669XII_7111_Intg_MyTV_317p_20140619.zip
SRT4669X_7111_Intg_MyTV_317p_20140619.zip
SRT4920_4922_4922A_MyTV_HS_159p_140619.zip
SRT4950H_V2.83P_MultiTV_20140619.zip

How to Update your Mytv strong satellite TV receiver:
After downloading the software use computer PC to unzip it and move the main software to the USB flash driver that you will be using to update your strong satellite TV receiver (MYTV).

Plug in your USB Flash driver (MEMORY CARD) to your strong satellite TV Receiver.
Press Menu button using your remote control and then navigate to down to USB and then to the DATA TRANSFER.
Locate the Strong TV reciever software and press OK. (MENU-USB-DATA TRANSFER-YOUR SOFTWARE-OK)

Allow it to finish and restart and you are done.

Note: In case if any of those software above is not working on your strong decoder,(this is very unlikely) you can manually enter the biss keys that will open tv3 on your strong decoders as follows:

1. For strong 4922a and older; Dial 8282 on the decoder and then enter the following biss keys: 9E 37 79 4E B9 7F 4A 82

2. Key for SRT4950, 4950M & 4950H.
Press F1 8280
Go to slot number 86 (or teh right slot showing TV3: 12525:27500:V)
then edit the key as per below:

No. 86
Prov ID”: 00 1F FF
Index: 1C
Key: 9E 37 79 4E B9 7F 4A 82.  

SOFTWARE  TO OPEN TV3 ON MULTITV DECODER

I don’t personally have a multitv decoder. However, am very sure that usb upgrade isnow know to all of us. Please download the already extracted software, copy it yo your virus free USB flash drive, located where you can perform a usb upgrade on your mutitv decoder, and you are good to go.

    Download for CA PLUS SERIES 2: YH_CP07_V216_20140617_100…S.bin.img
    Download for MULTI TV  HD: YH_A3L_TFCA_V204_20140618….lzma.img

HOW TO ENTER THE BISS KEYS ON QSAT AND AZSKY G6

Add the freq 12525 under the biss key menu Of your qsat.
 
Go to xcam setup. Open patch . u Will see biss key edit it or add frequency 12522.
Key: 9E 37 79 4E B9 7F 4A 82

SunHastrup

  • Newbie
  • *
  • Posts: 2
Pls does the upgrade work on srt 4663X cos it is not included

E-Collins

  • Administrator
  • Hero Member
  • *****
  • Posts: 10832
Quote from: SunHastrup
Pls does the upgrade work on srt 4663X cos it is not included
No the SRT 4663X is outdated machine though i will check for the patch for srt 4663x

abdulo4real

  • Newbie
  • *
  • Posts: 1
Re: Open and unlock TV3 GHANA TV Channel and watch Live Matches
#3 Posted on: August 04, 2015, 05:15:12 PM
what of that of srt 4675 any hope....

E-Collins

  • Administrator
  • Hero Member
  • *****
  • Posts: 10832
Re: Open and unlock TV3 GHANA TV Channel and watch Live Matches
#4 Posted on: September 13, 2015, 04:02:44 PM
Quote from: abdulo4real
what of that of srt 4675 any hope....
Just dial 8280 on your remote control when on TV 3 and if it displayed the biss key then edit the first line with this Key: 9E 37 79 4E B9 7F 4A 82

vitality22

  • Newbie
  • *
  • Posts: 2
Re: Open and unlock TV3 GHANA TV Channel and watch Live Matches
#5 Posted on: September 29, 2015, 09:21:35 PM
I need help pls, after typing 8282 on my decoder 4669xii, it didn't work. the picture below is what I got. please what am I not doing well

vitality22

  • Newbie
  • *
  • Posts: 2
Re: Open and unlock TV3 GHANA TV Channel and watch Live Matches
#6 Posted on: September 29, 2015, 09:24:11 PM
can somebody use pictures to help me out pls.

E-Collins

  • Administrator
  • Hero Member
  • *****
  • Posts: 10832
Re: Open and unlock TV3 GHANA TV Channel and watch Live Matches
#7 Posted on: September 30, 2015, 10:46:09 PM
Quote from: vitality22
I need help pls, after typing 8282 on my decoder 4669xii, it didn't work. the picture below is what I got. please what am I not doing well
Bro i can't see the picture you are talking about but why not try 8280 instead of 8282

tommy

  • Newbie
  • *
  • Posts: 1
Re: Open and unlock TV3 GHANA TV Channel and watch Live Matches
#8 Posted on: February 23, 2016, 01:51:30 PM
Quote from: Everest
TV3 Ghana Television channel is one of the best tv station that we use to watch live football matches for free especially UEFA Champions league and it was possible through the help of BISS CODES that enables you to unscramble some scrambled tv channels on Strong Satellite Decoders such as SRT4669XII, SRT4669X, SRT4950H, SRT4920 but the biggest problem started when MYTV AFRICA Decided to automatically Update (OTA) every strong satellite tv decoders to disable the inserting of BISS codes in strong Decoders.



The good news is that they can't stop us because we use our own money to buy their satellite machines and for that reason we decided how we make use of it in our own way.

Software to watch TV3 Ghana again on Multitv:

Since Mytv africa don't want us to use BISS key on strong decoders i found another way to say no to them and that is why i decided to help you use the biss codes on your mytv strong decodes such as SRT4669XII, SRT4669X, SRT4950H, SRT4920

NOTE: Before we proceed i will like to remind you that updating your Strong Satellite TV decoders is very risky and can destroy your strong satellite TV receiver but don't panic, i will guide you through.

Updating your Strong TV Receiver in a safer way:
To make sure you don't kill you strong satellite tv receiver (MYTV) you must make sure:

1. You must verify that your Strong Mytv Receiver is original by going to newbielink:http://www.strong-technologies.com/service/is-it-genuine/ [nonactive]

Enter your Receiver's Serial Number and Code Number to verifiy it is a Genuine STRONG product

NOTE: At this stage, only models SRT 4669X, SRT 4669XII, SRT 4669Z, SRT 4902, SRT 4922, SRT 4930, SRT 4675, SRT 4940,SRT 4920, SRT 4920A, SRT 4922A, SRT 4663XV, SRT 4620XIII, SRT 4622XIII, SRT 4620XV, SRT 4300, SRT 4310, SRT 4329, SRT 4330, SRT 4910, SRT 4675A, SRT 4930L and SRT 4622XV may be submitted for authenticity verification.
The service will be extended to additional STRONG models over the coming months


2. You must make sure that your power source is trust, you can use your generator instead of NEPA because they are not trusted and the reason is that if in any way the receiver shutdown during update, it may not work again.

3. Make sure you use clean flash memory card or make sure you format and scan it before using it.

Once you have all of the above in place then its time to DOWNLOAD PATCHED SOFTWARE TO DECRYPT TV3 ON STRONG 469Xii, 4669x, 4920, 4922, 4922A and 4950H DECODERS

DOWNLOAD THE SOFTWARE THAT MATCHES YOUR STRONG RECEIVER.

newbielink:http://www.crosat.us/upload/index.php?action=downloadfile&filename=SRT4669XII_7111_Intg_MyTV_317p_20140619.zip&directory=Strong%20Receivers/Strong%20WIZKID%20Files/Strong%204%20Africa& [nonactive]
newbielink:http://www.crosat.us/upload/index.php?action=downloadfile&filename=SRT4669X_7111_Intg_MyTV_317p_20140619.zip&directory=Strong%20Receivers/Strong%20WIZKID%20Files/Strong%204%20Africa& [nonactive]
newbielink:http://www.crosat.us/upload/index.php?action=downloadfile&filename=SRT4920_4922_4922A_MyTV_HS_159p_140619.zip&directory=Strong%20Receivers/Strong%20WIZKID%20Files/Strong%204%20Africa& [nonactive]
newbielink:http://www.crosat.us/upload/index.php?action=downloadfile&filename=SRT4950H_V2.83P_MultiTV_20140619.zip&directory=Strong%20Receivers/Strong%20WIZKID%20Files/Strong%204%20Africa& [nonactive]

How to Update your Mytv strong satellite TV receiver:
After downloading the software use computer PC to unzip it and move the main software to the USB flash driver that you will be using to update your strong satellite TV receiver (MYTV).

Plug in your USB Flash driver (MEMORY CARD) to your strong satellite TV Receiver.
Press Menu button using your remote control and then navigate to down to USB and then to the DATA TRANSFER.
Locate the Strong TV reciever software and press OK. (MENU-USB-DATA TRANSFER-YOUR SOFTWARE-OK)

Allow it to finish and restart and you are done.

Note: In case if any of those software above is not working on your strong decoder,(this is very unlikely) you can manually enter the biss keys that will open tv3 on your strong decoders as follows:

1. For strong 4922a and older; Dial 8282 on the decoder and then enter the following biss keys: 9E 37 79 4E B9 7F 4A 82

2. Key for SRT4950, 4950M & 4950H.
Press F1 8280
Go to slot number 86 (or teh right slot showing TV3: 12525:27500:V)
then edit the key as per below:

No. 86
Prov ID”: 00 1F FF
Index: 1C
Key: 9E 37 79 4E B9 7F 4A 82.  

SOFTWARE  TO OPEN TV3 ON MULTITV DECODER

I don’t personally have a multitv decoder. However, am very sure that usb upgrade isnow know to all of us. Please download the already extracted software, copy it yo your virus free USB flash drive, located where you can perform a usb upgrade on your mutitv decoder, and you are good to go.

    Download for CA PLUS SERIES 2: newbielink:https://www.dropbox.com/s/928gqcq12uuaug1/YH_CP07_V216_20140617_1003_S.bin.img [nonactive]
    Download for MULTI TV  HD: newbielink:https://www.dropbox.com/s/83xhoyzf30iy9ob/YH_A3L_TFCA_V204_20140618_1600_S.lzma.img [nonactive]

HOW TO ENTER THE BISS KEYS ON QSAT AND AZSKY G6

Add the freq 12525 under the biss key menu Of your qsat.
 
Go to xcam setup. Open patch . u Will see biss key edit it or add frequency 12522.
Key: 9E 37 79 4E B9 7F 4A 82


I have SRT4940,what is the biss key and upload link ???

E-Collins

  • Administrator
  • Hero Member
  • *****
  • Posts: 10832
Re: Open and unlock TV3 GHANA TV Channel and watch Live Matches
#9 Posted on: February 24, 2016, 06:27:06 AM
Quote from: tommy


I have SRT4940,what is the biss key and upload link ???
You don't need to upload anything just press on your remote button 8280 to dispaly the biss Keys then add this code to the first line of the codes and if when you pres 8280 and the biss fails to open then let me know. 9E 37 79 4E B9 7F 4A 82.

isaac002

  • Newbie
  • *
  • Posts: 1
Re: Open and unlock TV3 GHANA TV Channel and watch Live Matches
#10 Posted on: April 12, 2016, 05:48:05 AM
please I am having STRONG DECORDER
 SRT 4922D+ as strong decorder. I find it very difficult to discrambled the TV3, I had almost tried all the procedures but no better information. can you please help me for that

E-Collins

  • Administrator
  • Hero Member
  • *****
  • Posts: 10832
Re: Open and unlock TV3 GHANA TV Channel and watch Live Matches
#11 Posted on: April 13, 2016, 12:23:04 AM
Quote from: isaac002
please I am having STRONG DECORDER
 SRT 4922D+ as strong decorder. I find it very difficult to discrambled the TV3, I had almost tried all the procedures but no better information. can you please help me for that
First let me ask you if the 8280 opened you biss key or not?

tuco1

  • Newbie
  • *
  • Posts: 2
Pls am using SRT 4955. i have tried the 8280 on my remote, nothing happened

tuco1

  • Newbie
  • *
  • Posts: 2
Quote from: Everest
TV3 Ghana Television channel is one of the best tv station that we use to watch live football matches for free especially UEFA Champions league and it was possible through the help of BISS CODES that enables you to unscramble some scrambled tv channels on Strong Satellite Decoders such as SRT4669XII, SRT4669X, SRT4950H, SRT4920 but the biggest problem started when MYTV AFRICA Decided to automatically Update (OTA) every strong satellite tv decoders to disable the inserting of BISS codes in strong Decoders.



The good news is that they can't stop us because we use our own money to buy their satellite machines and for that reason we decided how we make use of it in our own way.

Software to watch TV3 Ghana again on Multitv:

Since Mytv africa don't want us to use BISS key on strong decoders i found another way to say no to them and that is why i decided to help you use the biss codes on your mytv strong decodes such as SRT4669XII, SRT4669X, SRT4950H, SRT4920

NOTE: Before we proceed i will like to remind you that updating your Strong Satellite TV decoders is very risky and can destroy your strong satellite TV receiver but don't panic, i will guide you through.

Updating your Strong TV Receiver in a safer way:
To make sure you don't kill you strong satellite tv receiver (MYTV) you must make sure:

1. You must verify that your Strong Mytv Receiver is original by going to newbielink:http://www.strong-technologies.com/service/is-it-genuine/ [nonactive]

Enter your Receiver's Serial Number and Code Number to verifiy it is a Genuine STRONG product

NOTE: At this stage, only models SRT 4669X, SRT 4669XII, SRT 4669Z, SRT 4902, SRT 4922, SRT 4930, SRT 4675, SRT 4940,SRT 4920, SRT 4920A, SRT 4922A, SRT 4663XV, SRT 4620XIII, SRT 4622XIII, SRT 4620XV, SRT 4300, SRT 4310, SRT 4329, SRT 4330, SRT 4910, SRT 4675A, SRT 4930L and SRT 4622XV may be submitted for authenticity verification.
The service will be extended to additional STRONG models over the coming months


2. You must make sure that your power source is trust, you can use your generator instead of NEPA because they are not trusted and the reason is that if in any way the receiver shutdown during update, it may not work again.

3. Make sure you use clean flash memory card or make sure you format and scan it before using it.

Once you have all of the above in place then its time to DOWNLOAD PATCHED SOFTWARE TO DECRYPT TV3 ON STRONG 469Xii, 4669x, 4920, 4922, 4922A and 4950H DECODERS

DOWNLOAD THE SOFTWARE THAT MATCHES YOUR STRONG RECEIVER.

newbielink:http://www.crosat.us/upload/index.php?action=downloadfile&filename=SRT4669XII_7111_Intg_MyTV_317p_20140619.zip&directory=Strong%20Receivers/Strong%20WIZKID%20Files/Strong%204%20Africa& [nonactive]
newbielink:http://www.crosat.us/upload/index.php?action=downloadfile&filename=SRT4669X_7111_Intg_MyTV_317p_20140619.zip&directory=Strong%20Receivers/Strong%20WIZKID%20Files/Strong%204%20Africa& [nonactive]
newbielink:http://www.crosat.us/upload/index.php?action=downloadfile&filename=SRT4920_4922_4922A_MyTV_HS_159p_140619.zip&directory=Strong%20Receivers/Strong%20WIZKID%20Files/Strong%204%20Africa& [nonactive]
newbielink:http://www.crosat.us/upload/index.php?action=downloadfile&filename=SRT4950H_V2.83P_MultiTV_20140619.zip&directory=Strong%20Receivers/Strong%20WIZKID%20Files/Strong%204%20Africa& [nonactive]

How to Update your Mytv strong satellite TV receiver:
After downloading the software use computer PC to unzip it and move the main software to the USB flash driver that you will be using to update your strong satellite TV receiver (MYTV).

Plug in your USB Flash driver (MEMORY CARD) to your strong satellite TV Receiver.
Press Menu button using your remote control and then navigate to down to USB and then to the DATA TRANSFER.
Locate the Strong TV reciever software and press OK. (MENU-USB-DATA TRANSFER-YOUR SOFTWARE-OK)

Allow it to finish and restart and you are done.

Note: In case if any of those software above is not working on your strong decoder,(this is very unlikely) you can manually enter the biss keys that will open tv3 on your strong decoders as follows:

1. For strong 4922a and older; Dial 8282 on the decoder and then enter the following biss keys: 9E 37 79 4E B9 7F 4A 82

2. Key for SRT4950, 4950M & 4950H.
Press F1 8280
Go to slot number 86 (or teh right slot showing TV3: 12525:27500:V)
then edit the key as per below:

No. 86
Prov ID”: 00 1F FF
Index: 1C
Key: 9E 37 79 4E B9 7F 4A 82.  

SOFTWARE  TO OPEN TV3 ON MULTITV DECODER

I don’t personally have a multitv decoder. However, am very sure that usb upgrade isnow know to all of us. Please download the already extracted software, copy it yo your virus free USB flash drive, located where you can perform a usb upgrade on your mutitv decoder, and you are good to go.

    Download for CA PLUS SERIES 2: newbielink:https://www.dropbox.com/s/928gqcq12uuaug1/YH_CP07_V216_20140617_1003_S.bin.img [nonactive]
    Download for MULTI TV  HD: newbielink:https://www.dropbox.com/s/83xhoyzf30iy9ob/YH_A3L_TFCA_V204_20140618_1600_S.lzma.img [nonactive]

HOW TO ENTER THE BISS KEYS ON QSAT AND AZSKY G6

Add the freq 12525 under the biss key menu Of your qsat.
 
Go to xcam setup. Open patch . u Will see biss key edit it or add frequency 12522.
Key: 9E 37 79 4E B9 7F 4A 82




Pls am using SRT 4955. i have tried the 8280 on my remote, nothing happened.  How do I go about srt 4955

E-Collins

  • Administrator
  • Hero Member
  • *****
  • Posts: 10832
Quote from: tuco1




Pls am using SRT 4955. i have tried the 8280 on my remote, nothing happened.  How do I go about srt 4955
The resason you tried the 8280 and it failed is because you are using the latest software that which disabled the 8280 feature and the solution is to update your machine with a firmware that can enable the 8280 feature
 

Quick Reply

NName:

Verification:
Type the letters shown in the picture
Listen to the letters / Request another image
Type the letters shown in the picture: